Fox Central Control Unit - Foxconn P35A Series User Manual

fox Central Control Unit

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Fox Central Control Unit
Smart Power LED
Fox Intelligent Stepping
► Overclock Options
► Voltage Options
► CPU Configuration
↑↓←→:Move Enter:Select
F7:Previous Values
► Smart Power LED (Optional)
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On System Test (POST). The LED is located at the front panel, and it displays POST
state by different long-short blinking intervals. You can always leave this state enabled.
► Fox Intelligent Stepping (FIS)
User can select different overcloking options by this item. Select [Auto], the system will
automatically adjust its CPU clock based on the current loading in running O/S and application
programs. Depending on series of motherboard design, one entry level model may provide
very limited overclocking mechanism, while in value edition design, the complete overclocking
functions are all provided. More detailed explanations of FIS feature can be found from FOX
One utility of Chapter 4.
If you select "Manual", it means FIS is disabled. You have to use the following three options to
configure overclocking manually.
Fox Central Control Unit
[Enabled] [Enabled]
[Manual]
[Press Enter]
[Press Enter]
[Press Enter]
+/-/:Value F10:Save ESC:Exit
F8:Fail-Safe Defaults
24
Help Item
Disabled/Enabled
F1:General Help
F9:Optimized Defaults