1-3 back Panel Connectors
PS/2 Mouse Port
1
2
PS/2 Keyboard
Serial
Port
Port
1. PS/2 Mouse Port
Use the upper port (green) to connect a PS/2 mouse.
2. PS/2 Keyboard Port
Use the lower port (purple) to connect a PS/2 keyboard.
3. Serial Port
Before using this port, make sure the "Serial Port2 mode" of "SuperIO Configuration" in
CMOS Setup is set to be [Normal].(Default is [Normal]).
4. Coaxial S/PDIf out Connector
This connector provides digital audio out to an external audio system that supports
digital coaxial audio. Before using this feature, ensure that your audio system provides
a coaxial digital audio in connector.
5. external SATA Port
To connect external SATA device(s) to your system by expanding the internal SATA
port(s) to the chassis back panel. External SATA device shall provide power by its own.
6. USb Ports
The USB port support the USB 2.0/1.1 specification. Use these ports for USB devices
such as an USB keyboard/mouse, USB printer, USB flash drive and etc.
Parallel Port
9
4
5
3
Coaxial
External
S/PDIF Port
SATA Port
LAN Port
8
6
USB 2.0
Ports
5
Line Out
Line In
Rear Speaker
Subwoofer
Side Speaker
Microphone
7
Audio Ports