Casio TK-3200 User Manual page 12

Getting Started
Loading journal paper
The same type of paper (45 mm 83 mm) is used for receipts and journal. Load the new paper before
first operating the cash register or when red paper appears from the printer.
REG2 X1
REG1 Z1
OFF
RF
PGM
12
E
Step 1
Use a mode key to set the
X2/Z2
mode switch to REG1
position.
Step 2
Open the printer cover.
Step 3
Cut off the leading end of
the paper so it is even.
Step 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 5
Drop the paper roll gently
and insert paper to the paper
inlet.
Step 6
Press the key until
about 20 cm to 30 cm of
paper is fed from the printer.
Step 7
Slide the leading end of the
paper into the groove on the
spindle of the take-up reel
and wind it onto the reel two
or three turns.