Printing Labels - SATO CX400 Quick Start Manual

starts printing.
4. Release the button.
5. The printer will print a test label and enter dump mode.
6. Restart the printer for normal printing.
Note:
While holding the FEED button, the indicator status will change. Do not
be concerned even if ERROR indicator is lit up.

4.6 Printing labels

To print labels, the host computer sends commands to the printer via the serial
or parallel communication port. If you are using the Label Gallery printing
software supplied on the CD-ROM, the computer and software control the
entire printing process. You only need to set up the printer, start your label
printing program, and follow its instructions. If you are using another vendor
software package, contact the software supplier or manufacturer if you
encounter difficulties. If you want to print labels from another Windows
application, the CX series Windows Printer Driver must be installed. It is
found in the CD-ROM and must be loaded using the standard Windows printer
installation instructions.
© 2009 SATO America, Inc. All rights reserved.