Using The Printer; Printing A Self-Test Label; Feeding Blank Labels - SATO CX400 Quick Start Manual

4. Using the Printer

4.1 Printing a self-test label

Printing a self-test label checks the printer's overall operability. To run a self-
test, confirm that the printer is loaded and connected to AC power and no print
jobs are in process. Then:
1. Turn off the power.
2. Press and hold the FEED button.
3. Turn on the power.
4. After the printer starts printing release the FEED button.
5. After the self-test label finishes printing, the printer will enter dump mode.
To return to normal operation, you should restart your printer.
Important!
The printer will be in hex dump mode after printing the self-test label. It
cannot print normal labels in hex dump mode. The printer will return to
normal operation only you restart the printer.

4.2 Feeding blank labels

To feed a label, press the FEED button if no image is in the printer buffer. To
clear the printer image buffer you press and hold the FEED button for about 5
seconds and release the FEED button.
© 2009 SATO America, Inc. All rights reserved.