Bios Configuration; Create Raid In Bios - Foxconn G45M Series User Manual

5-2 BIOS Configuration

1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self Test).
2. Select the "Integrated Peripherals" from the "Main menu", then select the
ATA Device" item and press <Enter> to go to the configuration items.
3. Select and Set the "Configure SATA#1 as" option to [RAID].
4. Press <F10> to save the setting then PC will reboot itself.
SATA#1 Configuration
Configure SATA#1 as
SATA#2 Configuration
↑↓←→:Move Enter:Select

5-3 Create RAID in bIoS

enter RAID bIoS Setup
When BIOS is restarted, it will display a message asking you to press <Ctrl>+<I> keys
simultaneously to enter the main menu of Intel
Utility. Press the <Ctrl>+<I> to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1013 ICH10R wRAID5 Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
RAID Volume :
None Defined.
Physical Disks:
Port Drive Model
0
2
4
5
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
OnChip ATA Devices
+/-/:Value
F9:Optimized Defaults
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
1. Create RAID Volume
2. Delete RAID Volume
[
DISK/VOLUME INFORMATION
Serial #
WDC WD2500JS-60N WD-WCANKC865380 232.9GB
Maxtor 6L250S0 L50SKP4G
ST3320620SV 9QF4YJGQ
ST3300831AS 3NF02XH2
[↑↓]-Select
[Enhanced]
[RAID]
[RAID]
[Enhanced]
IDE
RAID
AHCI
F10:Save ESC:Exit
® Matrix Storage Manager Option ROM
[ ]
MAIN MENU
3. Reset Disks to Non-RAID
4. Exit
]
Size
232.9GB
298.1GB
279.5GB
[ESC]-Exit [ENTER]-Select Menu
78
"OnChip
Help Item
Options
F1:General Help
* = Data is Encrypted
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk