Advanced Chipset Features - Foxconn G45M Series User Manual

Advanced Chipset features

Advanced Chipset Settings
WARNING: Setting wrong values in below sections
► North Bridge Configuration
► South Bridge Configuration
↑↓←→:Move Enter:Select
► North Bridge Configuration/ South Bridge Configuration
Press <Enter> to go to its submenu.
North Bridge Configuration
North Bridge Chipset Configuration
► Video Function Configure
Memory Remap Feature
PCI MMIO Allocation: 4GB To 3328MB
Memory Speed Adjust
Memory Timing by SPD
IGD Graphics Mode Select
IGD GTT Graphics memory size [No VT mode, 2MB]
PEG Port
↑↓←→:Move Enter:Select
► Video Function Configure
Press <Enter> to go to its submenu.
► Memory Remap Feature
This item is used to enable/disable memory remapping around memory hole.
PCI doesn't actually care much which addresses are used, but by convention the PC platform
puts them at the top of the 32-bit address space. For many years it wasn't possible or practical
to put that much RAM into a PC. But now it is, so it's up to the memory controller and host
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Features
may cause system to malfunction.
[Press Enter]
[Press Enter]
[Press Enter]
+/-/:Value
F9:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
North Bridge Configuration
[Press Enter]
[Press Enter]
[Enabled]
[Auto]
[Enabled]
[Enabled, 64MB]
[Auto]
+/-/:Value
F9:Optimized Defaults
Help Item
Configure North Bridge
features.
F10:Save ESC:Exit
Help Item
F10:Save ESC:Exit
31
F1:General Help
F1:General Help