Central Control Unit - Foxconn G45M Series User Manual

Central Control Unit

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Smart power LED
► O.C. Configuration
► Voltage Options
↑↓←→:Move Enter:Select
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On Self Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
System Status
Normal
No Memory
No Display
Post Error Message
No CPU Fan
► O.C. Configuration / Voltage Options
Press <Enter> to go to its submenu.
Central Control Unit
[Disabled] [Disabled]
[Press Enter]
[Press Enter]
+/-/:Value F10:Save
F9:Optimized Defaults
Power LED Status
Always On
Continue blinking On (1sec.), Off (1sec.)
Continue blinking On (2sec.), Off (2sec.)
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Continue blinking On (1/2sec.), Off (1/2sec.)
25
Help Item
Options
Disabled
Enabled
ESC:Exit F1:General Help
Stop Blinking Condition
Always On
Reboot & Memory OK
Reboot & Display OK
Enter Setup or Skip
Reboot & Fan OK