Integrated Peripherals - Foxconn G45M Series User Manual

Integrated Peripherals

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
► OnChip ATA Devices
► OnBoard Devices
► SuperIO Configuration
► USB Configuration
↑↓←→:Move Enter:Select
► OnChip ATA Devices/OnBoard Devices/SuperIO Configuration/USB Configuration
Press <Enter> to go to relative submenu.
onchip ATA Devices
SATA#1 Configuration
Configure SATA#1 as
SATA#2 Configuration
↑↓←→:Move Enter:Select
► SATA#1 Configuration
SATA#1 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you select the
mode of the SATA ports. Setting values are: [Disabled], [Compatible], [Enhanced].
► Configure SATA#1 as
This item is used to set the operation mode of your SATA ports 1, 2, 3, 4. Setting values are:
[IDE]; [RAID]; [AHCI].
[IDe] - This configures the SATA ports to support IDE mode.
Integrated Peripherals
+/-/:Value
F9:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
OnChip ATA Devices
+/-/:Value
F9:Optimized Defaults
[Press Enter] [Press Enter]
[Press Enter]
[Press Enter]
OnChip ATA Devices
[Press Enter]
F10:Save ESC:Exit
[Enhanced] [Enhanced]
[IDE]
[Enhanced]
Disabled
Compatible
Enhanced
F10:Save ESC:Exit
35
Help Item
F1:General Help
Help Item
Options
F1:General Help