Gripping The Phone; Activating The Phone - Pantech Pocket User Manual

Getting Started

Gripping the phone

Hold the phone in the right position for a call as indicated
below:
Correct
Make sure not to block the internal antenna embedded
x
in the phone. Check the location of the antenna on the
illustration on page 13.
Metal accessories can affect the quality of calls.
x
Note If you place your hand over the area where the internal antenna
is installed during a call or transmission/reception of data, the signals
may be poor and the battery life may drain very fast

Activating the phone

Go through the following steps when you turn on the phone for
the first time.
Learning how to use the phone
1. Press and hold the LOCK/PWR key to turn on the phone.
2. Tap the android.
3. Select and tap a language for the phone and tap Next.
4. Tap either Mobile network or Wi-Fi or Wi-Fi only, for
Internet connection and tap Next.
Incorrect
14
5. Tap Connect to Wi-Fi network > Next if you want to
establish a connection to the Wi-Fi network. Or tap Next if
you want to connect to the network later.
6. Select and tap an available Wi-Fi network if you have tapped
Connect to Wi-Fi network > Next in step 2. Follow the
necessary steps to connect to the Wi-Fi network. For more
information, refer to page 94.
7. Check the mobile network or Wi-Fi network and tap Next.
8. Tap See location in applications (such as Maps) using
wireless networks to Use Google location, tap Agree for
Location consent, and tap Next.
9. Tap Google account if you want to set up a Google account
and follow the necessary steps, or just tap Next. For more
information on creating a Google account, refer to the next
section.
10. Check how to unlock screen and tap Next in the middle of
the screen.
11. Check how to view new events in the notification bar and
tap Next.
12. Tap Sync now for Address Book sync. You should insert a
SIM/USIM card in the phone. Tap Skip if you want to sync
later and tap OK.
Note You can do all of these steps later by tapping Tutorial.