Call Settings - Pantech Pocket User Manual

English - manual
Hide thumbs Also See for Pocket:
Table of Contents

Advertisement

Setting VPN settings
1. Tap Settings > Wireless & networks > VPN settings > Add
VPN.
2. Tap Add PPTP VPN, Add L2TP VPN, Add L2TP/IPSec PSK
VPN or Add L2TP/IPSec CRT VPN.
3. Set up the network by entering necessary information.
Setting mobile networks
1. Tap Settings > Wireless & networks > Mobile networks.
2. Tap Data Services to allow access to data over mobile
network.
3. Tap International Data roaming to connect to data
services when roaming and tap OK.
Note You may incur significant roaming charges.
4. Tap Access Point Names > Phone APN, Broadband APN, or
Wap APN. Press n and tap New APN if you want to add an
APN in the Phone APN or Wap APN mode.
5. Tap Network operators > Default Setup > Automatic or
Manual if you want to search networks and select one.

Call settings

Managing fixed dialing numbers
Fixed dialing is a service that limits your access to specific
numbers in the address book list recorded on the SIM.
Input the PIN2 to set up or cancel this service.
1. Tap Settings > Call settings > Fixed Dialing Numbers.
2. Tap Enable FDN, Change PIN2, or FDN list.
3. Enter the necessary information.
Note You must enter the correct PIN2 within three attempts. If you
input incorrect codes three times in a row, the PIN2 code will be
blocked. If this happens, contact your service provider. Your PIN2
code is supplied with the SIM card.
Setting your voicemail
1. Tap Settings > Call settings > Voicemail settings >
Voicemail number.
2. Enter the voicemail number or tap
to designate as the voicemail number and tap OK.
3. Tap OK.
Setting Auto Redial
Tap Settings > Call settings > Auto Redial.
Setting TTY mode
1. Tap Settings > Call settings > TTY mode.
2. Tap TTY Off, TTY Full, TTY HCO or TTY VCO.
3. Tap OK.
Note When you connect the headphone into the ear jack of the
Phone, the TTY mode can work.
Setting DTMF Tones
1. Tap Settings > Call settings > DTMF Tones.
2. Tap Normal or Long.
3. Tap OK.
Setting Caller ID
1. Tap Settings > Call settings > Caller ID.
2. Tap Network default, Hide number or Show number.
3. Tap OK.
95
Settings
and select a contact

Advertisement

Table of Contents
loading

Table of Contents