Inserting The Battery; Charging The Battery - Pantech Pocket User Manual

Getting Started
applications to the SD card. You can expand the external
memory up to 32GB. We recommend that you format the
microSD card before using the phone. For more information,
refer to page 77.

Inserting the battery

1. Put your thumb in the groove at the bottom of the phone,
and then lift it up to remove the battery cover.
2. Align the gold contacts on the battery with the contacts
located at the top of the battery compartment on the phone.
3. Press the battery down until it lays flat in the compartment.
4. Close the battery cover.
About the battery
The phone uses a Lithium Ion (Li-Ion) battery. Make sure to use
the authorized battery and charger only. Maximum hours to
use the battery might vary depending on service types offered
by the service provider and temperatures. For more details,
inquire at your nearest dealer.
Note The Li-Ion battery can be recharged while some charge
remains without reducing your phone's autonomy due to the
"battery memory effect" inherent in those technologies.

Charging the battery

1. Open the protective cover on the right side of the phone
and connect the charger adapter to the USB connector of
the phone.
Correct
Note Make sure to align the connector as indicated in the image.
Otherwise, the charging connector will be damaged and the battery
will not be charged.
Battery Charging - Power ON
10
Incorrect
