Setting; Wireless & Networks; Call Settings - Pantech Burst User Manual

8. Settings
This chapter explains how to change the settings of the phone.
Access the settings from the applications menu or simply do it
on the home screen by pressing
Wireless & networks
Setting Airplane mode
1. Tap Settings > More... > Airplane mode. If you turn on
Airplane mode, Wi-Fi and Bluetooth functions are turned
off at once. However, you can turn on each function for your
preference.
2. Tap Airplane mode again to reactivate other functions.
Setting Wi-Fi networks
1. Tap Settings > Wi-Fi.
Refer to "Using a Wi-Fi network" on page 25 for more information.
Setting Bluetooth
1. Tap Settings > Bluetooth.
Refer to "Using Bluetooth" on page 26 for more information.
Setting Tethering and portable hotspots
1. Tap Settings > More... > Tethering & portable hotspot.
2. Tap USB tethering to provide Internet connection to other
devices. You should connect the phone with your other
device through a USB cable.
3. Tap Portable Wi-Fi hotspot to make the phone a portable
Wi-Fi hotspot. Refer to "Becoming a portable Wi-Fi
hotspot" on page 27 for more information.
and tapping Settings.
Setting Bluetooth tethering
1. Tap Settings from the applications menu.
2. Tap More... > Tethering & portable hotspot.
3. Tap Bluetooth tethering.
Setting mobile networks
1. Tap Settings > More... > Mobile networks.
2. Tap Data Services to allow access to data over mobile
network.
3. Tap International Data Roaming to connect to data
services when roaming and tap OK.
Note You may incur significant roaming charges.
4. Tap Access Point Names and tap a desired access point
names to edit. You can add a new APN by pressing
tapping New APN.

Call settings

Managing fixed dialing numbers
1. Tap Settings > Call settings > Fixed Dialing Numbers.
2. Tap Enable FDN, Change PIN2 or FDN list.
3. Enter necessary information.
Setting volume key answer
You can set to answer call by long pressing volume up key.
1. Tap Settings > Call settings > Volume Key Answer.
76
and