Adding Members To A Group - Pantech Burst User Manual

Adding members to a group

1. Tap S-Board from the applications menu.
2. Press and tap Add members.
3. Enter the name or phone number of a member to add to
a group. You can also add by tapping
tapping a contact, and tapping Done.
4. Tap on the top of the screen.
5. Enter a message in the empty space and tap Done.
6. Tap .
Deleting members from a group
1. Tap S-Board from the applications menu.
2. Press and tap Delete members.
3. Select and tap a member you want to remove.
4. Tap on the top of the screen.
5. Enter a message in the empty space and tap Done.
6. Tap .
Sharing media
1. Tap S-Board from the applications menu.
2. Tap Contents on the top left of the screen.
3. Tap a content icon.
, selecting and
4. Select content from a corresponding application.
5. Move the attached icon.
6. Resize the icon if it is resizable.
7. Tap Share.
Deleting logs
1. Tap S-Board from the applications menu.
2. Tap Logs.
3. Press
4. Select and tap logs you want to remove.
5. Tap
43
Note Then user may be charged for this service.
and tap Delete Logs.
.
Communication