Pantech Burst User Manual page 69

Moving toward a way point
1. Tap Start after you set a way point and start moving. The
moving track begins to be recorded.
2. Tap Pause if you stop recording temporarily. Tap Resume if
you want to resume recording.
3. Tap Stop if you want to end recording.
4. Tap Yes if you want to export data. The data is saved to an
external memory card.
Note You might have difficulty using the compass if you are indoors
or near metal materials.
Compass
Direction
N/S:
Latitude
E/W:
Longitude
Compass
Reviewing the moving track
1. Tap Compass from the applications
2. Press
3. Tap Start. The marker
4. Tap
Creating I'mark
Way point
1. Tap Compass from the applications menu.
Moving speed
2. Press
Moving distance
3. Enter a name, latitude, longitude, proximate range and
Remaining
Deleting I'mark
distance
1. Tap Compass from the applications menu.
2. Press
3. Press
4. Select and tap the I'mark to delete.
5. Tap
Note You can delete a I'mark by tapping and holding an I'mark in the
list and tapping Delete.
69
menu.
and tap Map View.
indicates your current location on
the map.
on the
map starts moving.
and move it up if you want
to zoom in the map. Move it down if
you want to zoom out the map.
and tap Add to I'mark.
comment and tap OK.
and tap I'mark list.
and tap Delete.
.
Tools
Reviewing the
moving track