Loading Film - Nikon F70 Instruction Manual

LOADING FILM

The loading film procedure on pages 16 to 17 shows
how to load film with auto film speed setting for DX-
coded films.
• To avoid fogging film (especially high-ISO film), do not
load/unload film in direct sunlight.
• Usable film speed range for DX-coded film is ISO 25 to
5000.
• For non-DX coded film, see p. 27.
16
1 Confirm whether DX for DX-coded film is shown on LCD
panel.
• If not, set auto film speed setting mode by using FUNCTION
button, SET/ button and command dial ( see page 27).
2 Slide camera back lock release 3 Install film. Insert the film cartridge
down to open camera back. by placing the cartridge spindle on
the fork at the bottom of the film
cartridge chamber.
4 Pull film leader out to red index 5 Check to ensure film is properly positioned with no slack (see illustration).
mark.
Do not touch shutter curtains with
your finger or with film leader.
17