Loading The Film - Nikon LITE TOUCH ZOOM 110S Instruction Manual

Loading the film

Recommended film
Use DX-coded 35mm film with this camera. It is recommended to use
DX-coded ISO 400 film, which provides good results when using the
flash, and helps avoid blurred images, should camera shake occur.
Hold the film cartridge and ensure film is properly positioned with no slack.
16 Preparations
1 Close the slide cover, then open
the camera back.
Slide the camera back lock release lever
(1), and open the camera back (2).
When loading/unloading film, be sure
not to open the camera back cover into
direct sunlight.
Insert a film cartridge.
2
Pull the film leader across
3
to the red index mark inside
the film compartment.
Make sure to align the film leader to the
red index mark; if the film leader is not
properly aligned to the index mark
(short of or beyond the mark), film
may not be loaded properly.