Operation In Shutter-Priority Auto Exposure Mode - Nikon F70 Instruction Manual

OPERATION IN SHUTTER-PRIORITY AUTO EXPOSURE MODE

1 Set lens to its minimum aperture 2 Hold FUNCTION button and rotate command dial until the Function Area indicator
setting (highest f-number). With AF appears in the Exposure Mode Area and exposure mode symbol blinks. Hold
Nikkor and AI-P Nikkor lenses, lock lens SET/ button and rotate command dial until
aperture at minimum setting (refer to lens in the viewfinder.
instruction manual).
If lens is not set to its minimum aperture setting and you set
the Shutter-Priority Auto, blinks in the LCD panel and
viewfinder as lens setting error alert.
52
appears on LCD panel. also appears
If "bulb" is set on the camera, selecting the Shutter-Priority
Auto exposure mode will cause to blink––a warning
that the "bulb" setting cannot be used in Shutter-Priority
Auto exposure mode.
3 Remove finger from SET/ button, and rotate command
dial to select desired shutter speed.
Shutter speed indication changes 1/3 step at a time in the
following sequence:
If meter has automatically turned off, along with LCD
indications, turn on meter—and LCD readout—again by
lightly pressing shutter release button.
4 Look inside viewfinder, compose and lightly press shutter
release button. Confirm the automatically set aperture
value.
53