All Mode Exposure Bracketing - Nikon F70 Instruction Manual

ALL MODE EXPOSURE BRACKETING

In situations where you might find it difficult to obtain a proper
exposure, All Mode Exposure Bracketing lets you shoot the
same subject at three different exposures, with a varying
exposure compensation degree of 0.3 EV, 0.5 EV, 0.7 EV or 1
EV.
If you set a compensation degree of 0.5 EV, for example, you
will take three pictures, the first shot having a -0.5 EV
compensation, the second shot having no compensation and
the third shot with a compensation of 0.5 EV.
80
1 While pressing FUNCTION button, rotate command dial until
the Function Area indicator indicates blinking in
the Bracketing Area. Then hold SET/ button and rotate
command dial until your desired compensation degree appears
in place of frame counter.
• If Flash Exposure Bracketing has already been set, setting All
Mode Exposure Bracketing cancels Flash Exposure
Bracketing.
• When " " is set, setting All Mode Exposure Bracketing
locks shutter and makes indication blink in LCD panel
and viewfinder.
• When All Mode Exposure Bracketing is set, " " cannot be
set.
First shot is taken.
2 Remove your finger from SET/ button to complete
setting.
3 Compose picture, confirm focus and exposure then fully
depress shutter release button.
Inside the viewfinder, and the electronic analog display
showing direction of compensation blink.
With film advance mode at or : Fully depress shutter
release button three times to take the three shots.
With film advance mode at or : Fully depress shutter
release button and hold it in until three shots are taken.
Second shot is taken. Third shot is taken.
4 After three shots are taken, All Mode Exposure Bracketing
is automatically canceled.
If you want to take one more set of exposure bracketing
shooting with the same degree of compensation, press
FUNCTION button then SET/ button.
• If film reaches end of roll during shooting, rewind film, load a
new roll of film, fully depress shutter release button to
advance film to frame 1, then fully depress shutter release
button again to resume operation.
81