Programming Your Thermostat; 5-1-1 Programming - Honeywell Chronotherm III Owner's Manual

Programming Your Thermostat

The thermostat can be programmed in your hand be-
fore it is installed or after it is on the wall if you make sure
the batteries are installed. If you need to install or re-
place the batteries, refer to the Maintaining Your Ther-
mostat section.

5-1-1 PROGRAMMING

The Program Schedule chart can be helpful for plan-
ning your program schedule of time and temperature
settings for various times of the day.
Four time periods are available.
REVÉIL is the time period when you want the house
at a comfortable temperature while the family gets
up and gets ready to leave for work or school. (This
will be a higher temperature during the heating
season, or a lower temperature during the cooling
season.) This is the only period that must contain a
time and a temperature.
ACTIVER
PROGRAMME
RÉGLER
JOUR
JOUR/HEURE
MODE
COUCHER
RÉGLAGE
CHAUFF.
CONSTANT
REFROID
MARCHE AUTO
VENT.
6
TEMPERATURE
RÉGLAGE
ACTUEL
PÉRIODE HEURE
SORTIE
RÉVEIL
+CHAUD
AVANCER
RETOUR
RECULER +FROID
CHAUFF. ARRÊT REFROID.
SYSTEME
SAUTER
PROCHAINE
PÉRIODE
REVENIER
PÉRIODE
PRÉCÉDENTE
M9575
69-0865