Checking The Program Times And Temperatures; Checking The Current Temperature Setting - Honeywell Chronotherm III Owner's Manual

1. Press and hold the desired period key (RÉVEIL,
SORTIE, RETOUR, CHOUCHER) until the time and tem-
perature clear from the display (about three seconds).
2. Press and release ACTIVER PROGRAMME key
to return to normal operation.
CHECKING THE PROGRAM TIMES AND
TEMPERATURES
You can check all the stored settings without affecting
the permanent program.
1. Press and release the desired period key (RÉVEIL,
SORTIE, RETOUR, CHOUCHER). The start time and tem-
perature setting will appear on the display.
2. Press and release the JOUR key to display the next
daily time and temperature for that period.
3. Press and release the ACTIVER PROGRAMME
key to return to normal operation.
CHECKING THE CURRENT TEMPERATURE
SETTING
Press a single key to compare the actual room tem-
perature to the setting at any time. Press and release the
RÉGLAGE ACTUEL key. The display will show the cur-
rent temperature setting for several seconds, then revert
to the room temperature.
During recovery from energy savings, the setting dis-
played will not match the programmed setting. This is
because the thermostat gradually changes the tempera-
ture setting during recovery to provide maximum comfort
combined with the most efficient use of the heating or
cooling equipment.
13 69-0865