Programming The Thermostat - Honeywell T7200 Owner's Manual

The following general steps are required to enter
your weekly time and temperature schedule into the
thermostat.
. Enter the correct time and day.
. Enter the temperature setpoints you want for
heating and cooling system operation.
. For each day of the week, enter starting time for
the periods when your building will be occupied
and unoccupied.
. To review program entries, simply press the same
function keys used to begln each programming
step. For example, to review the occupied cool
temperature setpoint, press the OCCUPIED
COOL key.
. Sample schedules can be found at the end of the
PROGRAMMING THE THERMOSTAT section.
Convenient keyboard layout provides effortless
program entry. your avenue to maximum energy
and cost savings.
The following pages provide
instructions to program the T7200/T7300
mable Commercial Thermostats.
PROGRAMMING NOTES:
The + and - kevs are used to adjust the dav. time or
setpoint temperatures
IMPORTANT
This thermostat provides security which can lock
out programming to prevent tampering. If the key-
board or display do not respond, programming may
be locked out -- contact your installer. The override,
display and clock keys remain active and are not
locked out by this feature. See the section titled
SECURITY AND OVERRIDES for details.
function-by-function
Program-
ahead or'back respectively
1