D-Link NetDefend DFL-210 User Manual page 494

dynamic, 157
local IP address, 134
metric for default routes, 138
metrics, 132, 158
monitoring, 140
principles, 132
routes added at startup, 138
static, 132
the all-nets route, 138
S
SA (see security association)
SafeStream, 274
SAT, 306
all-to-1 mapping, 312
IP rules, 112
multiple address translation, 310
multiplex rule, 165
port forwarding, 306
second rule destination, 306
schedules, 115
SCP, 42
scripting (see CLI scripts)
Secondary Time Server setting, 126
secure copy (see SCP)
SecuRemoteUDP Compatibility setting, 454
secure shell (see SSH)
security association, 351
Send Limit setting, 56
serial console (see console)
serial console port, 35
server load balancing, 426
connection rate algorithm, 428
round robin algorithm, 428
with FwdFast rules, 430
service, 80
all_services, 83
custom, 84
group, 85
ICMP, 83
max sessions, 83
specifying port number, 81
SYN flood protection, 82
TCP and UDP, 81
service based routing, 146
sessionmanager CLI command, 38
sgs file extension, 39
Silently Drop State ICMPErrors setting, 462
simple network management protocol (see SNMP)
SIP
ALG, 229
and traffic shaping, 229
record-route, 230
SLB (see server load balancing)
SMTP
ALG, 218
ESMTP extensions, 220
header verification, 224
log receiver with IDP, 285
whitelist precedence, 219
SNMP
advanced settings, 66
community string, 65
MIB, 65
monitoring, 65
traps, 55
with IP rules, 65
SNMP Before Rules setting, 66
SNMP Request Limit setting, 66, 67
source based routing, 146
SPAM filtering, 221
caching, 225
logging, 224
tagging, 223
spam WCF category, 269
spanning tree relaying, 187
spillover RLB algorithm, 151
spoofing, 204
SSH, 36
SSH Before Rules setting, 46
SSL acceleration, 253
state-engine, 18
packet flow, 21
stateful inspection (see state-engine)
stateful NAT pools (see NAT)
Static address translation (see SAT)
Static ARP Changes setting, 107
Strip DontFragment setting, 456
switch routes (see transparent mode)
Sync Buffer Size (HA) setting, 444
Sync Pkt Max Burst (HA) setting, 444
SYN flood protection, 82, 292
syslog, 54
System Contact (SNMP) setting, 67
System Location (SNMP) setting, 67
System Name (SNMP)setting, 67
T
tab completion (see CLI)
TCP Auto Clamping setting, 457
TCP ECN setting, 460
TCP FIN/URG setting, 460
TCP FIN Idle Lifetime setting, 465
TCP Idle Lifetime setting, 465
TCP MSS Log Level setting, 457
TCP MSS Max setting, 457
TCP MSS Min setting, 457
TCP MSS On High setting, 457
TCP MSS on Low setting, 457
TCP MSS VPN Max setting, 457
TCP NULL setting, 460
TCP Option ALTCHKDATA setting, 459
TCP Option ALTCHKREQ setting, 458
TCP Option Con Timeout setting, 459
TCP Option Other setting, 459
TCP Option SACK setting, 458
TCP Option Sizes setting, 457
TCP Option TSOPT setting, 458
TCP Option WSOPT setting, 458
TCP Reserved Field setting, 460
TCP Sequence Numbers setting, 460
TCP SYN/FIN setting, 459
TCP SYN/PSH setting, 459
TCP SYN/RST setting, 459
494
Alphabetical Index