D-Link NetDefend DFL-210 User Manual page 335

8.3. Customizing HTML Pages
2. A new Auth Banner Files object must exist which the edited file(s) is uploaded to. If the
object is called ua_html, the CLI command to create this object is:
gw-world:/> add HTTPAuthBanners ua_html
This creates an object which contains a copy of all the Default user auth banner files.
3. The modified file is then uploaded using SCP. It is uploaded to the object type
HTTPAuthBanner and the object ua_html with property name FormLogin. If the edited
Formlogon local file is called my.html then using the Open SSH SCP client, the upload
command would be:
pscp my.html admin@10.5.62.11:HTTPAuthBanners/ua_html/FormLogin
The usage of SCP clients is explained further in Section 2.1.6, "Secure Copy".
4. Using the CLI, the relevant user authentication rule should now be set to use the ua_html. If the
rule us called my_auth_rule, the command would be:
set UserAuthRule my_auth_rule HTTPBanners=ua_html
5. As usual, use the activate followed by the commit CLI commands to activate the changes on
the NetDefend Firewall.
335
Chapter 8. User Authentication