D-Link NetDefend DFL-210 User Manual page 175

4.6.4. Advanced IGMP Settings
Chapter 4. Routing
IGMP Router Version
The IGMP protocol version that will be globally used on interfaces without a configured IGMP
Setting. Multiple querying IGMP routers on the same network must use the same IGMP version.
Global setting on interfaces without an overriding IGMP Setting.
Default: IGMPv3
IGMP Last Member Query Interval
The maximum time in milliseconds until a host has to send an answer to a group or
group-and-source specific query. Global setting on interfaces without an overriding IGMP Setting.
Default: 5,000
IGMP Max Total Requests
The maximum global number of IGMP messages to process each second.
Default: 1000
IGMP Max Interface Requests
The maximum number of requests per interface and second. Global setting on interfaces without an
overriding IGMP Setting.
Default: 100
IGMP Query Interval
The interval in milliseconds between General Queries sent by the device to refresh its IGMP state.
Global setting on interfaces without an overriding IGMP Setting.
Default: 125,000
IGMP Query Response Interval
The maximum time in milliseconds until a host has to send a reply to a query. Global setting on
interfaces without an overriding IGMP Setting.
Default: 10,000
IGMP Robustness Variable
IGMP is robust to (IGMP Robustness Variable - 1) packet losses. Global setting on interfaces
without an overriding IGMP Setting.
Default: 2
IGMP Startup Query Count
The firewall will send IGMP Startup Query Count general queries with an interval of
IGMPStartupQueryInterval at startup. Global setting on interfaces without an overriding IGMP
Setting.
175