Secure Copy - D-Link NetDefend DFL-210 User Manual

2.1.6. Secure Copy

This creates a script file called new_script_sgs which contains all the CLI commands necessary to
create all IP4Address address objects in that unit's configuration. The created file's contents might,
for example, be:
add IP4Address If1_ip Address=10.6.60.10
add IP4Address If1_net Address=10.6.60.0/24
add IP4Address If1_br Address=10.6.60.255
add IP4Address If1_dns1 Address=141.1.1.1
The file new_script_sgs can then be downloaded with SCP to the local management workstation and
then uploaded and executed on the other NetDefend Firewalls. The end result is that all units will
have the same IP4Address objects in their address book.
The name of the file created using the -create option cannot be greater than 16 characters in length
(including the extension) and the filetype should be .sgs.
Certain aspects of a configuration which are hardware dependent cannot have a script created using
the -create option. This is true when the CLI node type in the script -create command is one of:
COMPortDevice
Ethernet
EthernetDevice
Device
If one of these node types is used then the error message script file empty is returned by
NetDefendOS.
Commenting Script Files
Any line in a script file that begins with the # character is treated as a comment. For example:
# The following line defines the If1 IP address
add IP4Address If1_ip Address=10.6.60.10
Scripts Running Other Scripts
It is possible for one script to run another script. For example, the script my_script.sgs could contain
the line:
"
"
script -execute -name my_script2.sgs
"
"
NetDefendOS allows the script file my_script2.sgs to execute another script file and so on. The
maximum depth of this script nesting is 5.
2.1.6. Secure Copy
"
"
"
Tip: Listing commands at the console
To list the created CLI commands on the console instead of saving them to a file, leave
out the option -name= in the script -create command.
Chapter 2. Management and Maintenance
42