Setup L2Tp Network Client - D-Link DFL-900 User Manual

D-Link

11.4.2 Setup L2TP Network Client

Step 1 – Enable L2TP LAC
Fill in the IP address of LNS Server and allocates
Username/Password. When connecting to the
LNS Server successfully, it will appear the
allocated IP address for the L2TP client in the
"Assigned IP" field, and the IP address of LAC
host peer host will appear in the "Remote IP" field.
FIELD
Enable L2TP LAC
LNS IP
Username
Password
Assigned IP
Remote IP
Connecting to the L2TP VPN
1. Connect to your ISP.
2. Start the dial-up connection configured in the previous procedure.
3. Enter your L2TP VPN User Name and Password.
4. Select Connect.
ADVANCED SETTINGS > VPN Settings > L2TP > LAC
Enable L2TP LAC feature of DFL-900
The IP address of LNS server.
The designed account which allows LAC client to dial in.
The designed password which allows LAC client to dial in.
The allocated IP address when LAC host connects to the LNS server.
The IP address in the LNS server side when LAC host connects to the LNS
server.
Table 11-2 Setup L2TP LAC settings
DESCRIPTION
68
Part III
EXAMPLE
enabled
61.2.1.1
L2tpUser
Dif3wk