Table of Contents
Advertisement
D-Link
5.3
Steps
Setup Telnet
Check the WAN1 checkbox, click the Selected,
and enter the IP address (140.2.5.1) that will
telnet to the DFL-900. And click the Apply.
Setup WWW
Check the LAN1 checkbox, and enter the new
server port 8080 that will be accessed by the
user's browser (http://192.168.40.254:8080). And
click the Apply. If you are configuring the
DFL-900 with HTTP, your browser will then
automatically be directed to the new server port.
Setup SNMP
Check the LAN1 checkbox, click the Selected,
and enter the IP address (192.168.40.1) that
will read the SNMP MIBs at the DFL-900. And
click the Apply.
Setup ICMP
Uncheck the WAN1 checkbox and then click the
Apply.
SYSTEM TOOLS > Remote Mgt. > TELNET
SYSTEM TOOLS > Remote Mgt. > WWW
SYSTEM TOOLS > Remote Mgt. > SNMP
SYSTEM TOOLS > Remote Mgt. > MISC
28
Part I
Advertisement
Table of Contents
