Manual Network Setup - Tcp/Ip Configuration; Obtaining An Ip Address Automatically - D-Link DWR-M960 User Manual

This chapter will show you how to configure the basic functions of your Wireless Router using Quick Setup
within minutes.
A computer with wired Ethernet connection to the Wireless Router is required for the first-
time configuration.

4.1 Manual Network Setup - TCP/IP Configuration

The default IP address of the Wireless Router is
These values can be changed as you desire in the web UI of the Wireless Router. In this section, we use all the
default values for description.
Whether the Wireless Router is configured via wired or wireless connection, the PC needs to be assigned an IP
address first. Before you connect the local PC to the Wireless Router via wired or wireless connection, please
configure the IP address for your PC in the following two ways first.
◼

Obtaining an IP address automatically

◼
Configuring the IP address manually
In the following sections, we'll introduce how to install and configure the TCP/IP correctly in Windows 7. And the
procedures in other operating systems are similar. First, make sure your Ethernet Adapter is working, and refer
to the Ethernet adapter's manual if needed.
4.1.1 Obtaining an IP Address Automatically
Summary:
1. Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC.
Chapter 4. Quick Installation Guide
192.168.0.1 and the default Subnet Mask is 255.255.255.0.
-26-
User Manual of DWR-M960