Log Configuration; Logout - D-Link DSL-2544N User Manual

Dual band wireless n600 gigabit adsl2+ modem router

Hide thumbs Also See for DSL-2544N:

Table of Contents

Section 3 – Web Configuration

Log Configuration

Choose MAINTENANCE > Log Configuration. The System Log page is shown

as the figure appears on the right.

This page displays event log data in the chronological manner. You can read the

event log from the local host or send it to a system log server. In this page, you

can enable or disable the system log function.

To log the events, take the following steps.

Step 1

Select Enable Log check box.

Step 2

Select the display mode from the Mode drop-down list.

Step 3

Enter the Server IP Address and Server UDP Port if the Mode is set

to Both or Remote.

Step 4

Click Apply to apply the settings.

Step 5

Click View System Log to view the detail information of system log.

Choose MAINTENANCE > Logout. The page is shown as the figure appears on

the right. In this page, you can log out of the configuration page.

D-Link DSL-2544N User Manual

Table of Contents

Show Quick Links

Table of Contents