Section 3 – Web Configuration
Click Add to display the following page.
Entry Name: the name of the host within the network.
Internal IP Type:
- Single IP: The special single PC in the internal network is allowed to access
the external network.
- IP Range: A group of PCs whose IP addresses are in the IP range are allowed
to access the external network.
Internal IP Address: if Single IP is selected, then you're required to enter the IP
address of the PC.
Start/End Internal IP Address: if IP Range is selected, then you're required to
enter the IP Range.
External IP Type:
- Single IP: The single IP address the internal PC wants to access.
- IP Range: The IP Range that the internal PC wants to access.
External IP Address: if Single IP is selected, then you're required to enter the
external IP address the internal PC wants to access.
Start/End Internal IP Address: if IP Range is selected, then you're required to
enter the external IP Range the internal PC wants to access.
After setting, click Apply to save the settings.
Logout
Choose ADVANCED > Logout. The page is shown as the figure appears on the
right. In this page, you can log out of the configuration page.
D-Link DSL-2544N User Manual
54