Table of Contents
Advertisement
setup screen
5.
Specify an operation that will perform if an alarm occurs.
•
Alarm output1 / Alarm output2 : Select whether to set the alarm output if an alarm
is incoming, and specify the alarm output time.
•
E-mail sending : Specify the use of email transfer in the alarm input setup.
•
Record : Specify the use of recording in the alarm input setup.
•
Goto Preset : Moves to the specified preset location when setting the alarm input.
6.
When done, click [Apply (
VA / MD
1.
From the Setup menu, select the
<Event (
2.
Click <VA / MD>.
To set the Motion Detection
1.
Select a motion detection mode.
2.
Specify the use of motion detection.
3.
Select a sensitivity level of the motion
detection.
4.
Place the cursor at a point in the video
and drag it to whatever you need.
You can specify up to 4 motion detection
areas.
5.
Specify the activation time and
activation condition.
For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 85)
6.
When done, click [Apply (
J
If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motion
sensor may not work.
86_ setup screen
)> tab.
)].
)].
Advertisement
Table of Contents
