Table of Contents
Advertisement
3.
Specify the record conditions.
•
Record 1 fps forcibly : Only one frame per second will be recorded regardless of
the existing record profile.
•
Overwrite : If the SD memory is full, this will delete old data and store new data in
replacement.
•
Pre-alarm duration : Specify the time point before the occurrence of the alarm;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the alarm.
•
Post-alarm duration : Specify the time point after the occurrence of the alarm; to
the specified time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the alarm.
4.
When done, click [Apply (
Alarm input 1 ~ 4
You can set the alarm input type, activation time, and operation mode.
1.
From the Setup menu, select the
<Event (
)> tab.
2.
Click <Alarm input>.
3.
Specify an input device.
•
Type
-
Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
-
Normal Close : It is normally
closed, but if it is open, an alarm
will be triggered.
4.
Specify the <Activation time>.
•
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to Always, the activation time cannot be changed.
•
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
•
[
] : Reset all settings.
)].
English _85
Advertisement
Table of Contents
