Table of Contents
Advertisement
To set the auto run
This will perform the sequence operation that you have specified if no controller
manipulation is made for a certain time.
1.
Set <Mode> in <Sequence setup> to
<Trace & Auto Run>.
The menu screen will switch to the
PTZ tracking and Auto execution menu
screen.
2.
Select an auto run mode.
•
Home : Automatically executes the
operation to the home position.
•
Preset : Automatically executes the
operation to the preset number.
•
Swing : Automatically executes the operation in Swing mode.
•
Group : Automatically executes the operation in Group mode.
•
Tour : Automatically executes the operation in Tour mode.
•
Trace : Automatically executes the operation in Trace mode.
•
Auto pan : Automatically executes the 360° rotation in the pan direction.
PTZ limit
You can specify restrictions on the pan or tilt function.
1.
From the Setup menu, select the
<Audio & Video (
2.
Click <PTZ limit>.
3.
Decide if you want to limit the PTZ
operations. If so, specify the details.
•
Pan / Tilt Limit : Select a mode to set
between Pan limit and Tilt limit.
-
Use : Select whether to use limit in
set mode.
-
[
] : Start limit setting.
-
[
] : The starting point will be saved.
-
[
] : The ending point will be saved then the limit mode runs in
specified range between the start point and end point respectively.
)> tab.
English _71
Advertisement
Table of Contents
