Table of Contents
Advertisement
setup screen
To configure the tour settings
The tour function enables you to call groups of your presets in sequence.
1.
Set <Mode> in <Sequence setup> to
<Tour>.
The menu screen will switch to the tour
setting screen.
2.
Configure the tour settings in detail.
•
Group No. : Select a group number.
•
Dwell time : Specify a waiting time
before a new group is called.
3.
Press the [
Your settings will be entered in the right list.
4.
Press the [
Set data on the right list will be saved.
5.
Press the [
Selected tour data will be deleted.
To set the tracing function
Tracking remembers the trace of movements instructed using the direction button and
reproduces it for your reference.
1.
Set <Mode> in <Sequence setup> to
<Trace & Auto Run>.
The menu screen will switch to the
PTZ tracking and Auto operation menu
screen.
2.
Select a tracking number.
The operation will be saved with display
of the memory usage. The saving time
differs, depending on the level of the
PTZ operation.
This process will be terminated if the memory is full.
3.
Press the [
Selected tracing number will be saved.
4.
Press the [
Selected tracing number will be activated as set.
5.
Press the [
Tracing will be stop.
70_ setup screen
] button.
] button.
] button.
] button.
] button.
] button.
Advertisement
Table of Contents
