Pitch Bend Rate - M-Audio Keystation Mini 32 User Manual

To return the Pitch Bend buttons to the default parameter:
Press the Edit button. The Edit button light will illuminate to full brightness.
1
Press the "PB ASSIGN" key (D#, 2nd black key from the right).
2
Press the "DEFAULT" key (C, 8th white key from the left). The Edit light will dim to half brightness indi-
3
cating that programming is complete.

Pitch Bend Rate

It is possible to alter the sensitivity of the Pitch Bend buttons using the Pitch Bend Rate function. This lets you
adjust the pitch bend ramp up time. The default setting is 80, with a range of 0 - 127. As the shown in the fol-
lowing table, the lower the value, the slower the Pitch Bend Rate and vice versa.
Value
0
80 [default]
126
127
The Pitch Bend Rate can be adjusted using the "PB RATE" key in conjunction with the numerical keys. The fol-
lowing instructions use the example of changing the Pitch Bend Rate to 127.
To adjust the Pitch Bend Rate:
Press the Edit button to engage Edit Mode and the Edit button light will illuminate to full brightness.
1
Press the "PB RATE" key (E, 3rd white key from the left).
2
Press E (10th white key from the right) to enter "1."
3
Press F (9th white key from the right) to enter "2."
4
Press D (4th white key from the right) to enter "7."
5
Keystation Mini 32 User Guide
Rate
Ramp occurs slowly
Ramp occurs relatively quickly
Ramp occurs very quickly
No ramp. Only one value is sent – min. or max
18
Chapter 4: Edit Mode