Volume Knob - M-Audio Keystation Mini 32 User Manual

If you make an error while entering the value, press the "CANCEL" key to exit Edit Mode without making any changes.
As an alternative to steps 3 through 5, you can use the "+" and "-" buttons to change the value.
Press the "ENTER" key (G, last white key on the right), the Edit light will dim to half brightness indicating
6
that programming is complete.
Press the "PB>" button while playing to hear how the Pitch Bend will occur faster than before.
7
The PB Rate setting is retained when the keyboard is turned off.
To return the Pitch Bend Rate to the default setting:
Press the Edit button. The Edit button light will illuminate to full brightness.
1
Press the "PB RATE" key (E, 3rd white key from the left).
2
Press the "DEFAULT" key (C, 8th white key from the left). The Edit light will dim to half brightness indi-
3
cating that programming is complete.

Volume Knob

The Volume Knob can is also assignable to any of the 131 parameters listed in Appendix D, "Standard MIDI
CC Numbers" on page 30.
To assign the Volume Knob to an effect:
Press the Edit button. The Edit button light will illuminate to full brightness.
1
Press the "KNOB ASSIGN" key (F#, 1st black key from the right).
2
Use the Numerical Data Entry keys (0 - 9) to enter the number of the parameter you want to assign to the
3
Volume Knob.
If you have made an error while entering the parameter number, you can press the "CANCEL" key (C, first white key on
the left) to exit Edit Mode without making any changes.
As an alternative to step 3, you can use the "+" and "-" buttons to change the parameter.
Press the "ENTER" key (G, last white key on the right), the Edit light will dim to half brightness indicating
4
that program-ming is complete.
Move the Volume knob clockwise to increase the parameter value.
5
Keystation Mini 32 User Guide
19
Chapter 4: Edit Mode