Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XE31 Owner's Manual

Video Input

Input Source Selection (Video, S-Video)

Direct Operation
Select Video by pressing the VIDEO button on the remote
control.
Before using VIDEO button, select the correct input source
through menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the Input Menu icon.
2
Press the Point
pointer to Video and then press the SELECT button to
display the Source Select Menu .
3 Move the pointer to the source that you want to select
and then press the SELECT button.
When
Auto
automatically detects incoming video signal, and
adjusts itself to optimize its performance. The
projector selects connection in the following
order:
1. S-Video
2. Video
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-Video
VIDEO jack, select S-Video.
buttons to move the red
7 8
ed buttons to move the red arrow
selecting Auto, the
Remote Control
Input Menu
VIDEO
projector
VIDEO button
Input Menu icon
Move the pointer to
Video and press the
SELECT button.
Source Select Menu (VIDEO)
Move the pointer to the
source that you want to
select and press the
SELECT button.
35