Sanyo PLC-XE31 Owner's Manual page 34

Computer Input
For zooming in and out the images
Digital zoom +
When the Digital zoom + is selected, the On-Screen Menu
disappears and "D. zoom +" is displayed. Press the
SELECT button to expand the image size. And press the
Point ed7 8 buttons to pan the image. The Panning
function can work only when the image is larger than the
screen size.
A projected image can be also expanded by pressing the
▲
D.ZOOM button on the remote control.
Digital zoom –
When Digital zoom – is selected, the On-Screen Menu
disappears and "D. zoom –"is displayed. Press the SELECT
button to compress image size.
A projected image can be also compressed by pressing the
▼
D.ZOOM button on the remote control.
To exit the Digital zoom +/– mode, press any button except
▲▼
the D.ZOOM buttons, SELECT, and Point button.
To return to the previous screen size, select a screen size in
the Screen Size Adjustment or select an input source from
the Input Source Selection (p. 26) again, or adjust the screen
size with the D.ZOOM
✔
Note:
•The panning function may not operate properly if the stored Mode
in the PC Adjust Menu is used. (p. 30)
•The minimum compression ratio can be limited depending on the
input signal or when the Keystone function is working.
• True, Full screen, and Digital zoom +/– cannot be selected when
480i, 575i, 480p, or 575p is selected in the PC System Menu
(p. 27)
•Digital zoom +/- cannot be selected when Full screen or True is
selected.
34
▲▼
buttons.
Remote Control
POINT buttons
SELECT button
D.ZOOM + button
D.ZOOM - button