5.
Configuring Server and HTTP Ports
If you would like to change the server and HTTP ports from the default settings, you can do so
in the Network Settings menu. The default server port is 8000 while the default HTTP port is 80.
To change the default ports:
1.
2.
3.
4.
Click OK to save the settings and exit the menu.
Click Menu
Settings
Select the Advanced tab.
Next to Host/Others, click Set to enter the Host/Others menu.
Enter new Server Port and HTTP Port (see
Figure 8-10
Host/Others Menu
Note
The Server Port has a port range of 2000 to 65535 and is used for remote client
software access. The HTTP port is used for remote Internet browser access.
Network to enter the Network Settings menu.
Figure
8-10).
Network Settings | 79
800-12005 - A - 06/2012