Operation
4.7 Alarm Setpoints
Procedure for Displaying the Alarm Setpoints
Table 4-9 Procedure for Displaying or Changing the Alarm Setpoints
Step
Operation
Access the
1
Alarm Set
Up group
2
Access the
Alarm
Setpoint
Values
3
Return to
normal
operation
4.8 Three Position Step Control Algorithm
The Three Position Step Control algorithm (Loop 1 only) allows the control of a valve
(or other actuator) with an electric motor driven by two controller output relays; one
to move the motor upscale, the other to move it downscale, without a feedback
slidewire linked to the motor shaft. Accutune TUNE operates with this algorithm.
Displaying the Motor Position
Table 4-10 Procedure for Displaying the 3PSTEP Motor Position
Step
Operation
1
Access the
displays
46
Press
until you see ALARMS in the Lower Display.
SET UP
FUNCTION
to successively display the alarm setpoints and their
values.
LOOP 1/2
to change any alarm setpoint value you select in the
or
upper display.
LOWER
DISPLAY
Press
LOWER
until you see the PV Value in the Upper Display and
either POS or OUT in the Lower Display.
DISPLAY
UDC3300 Basic Model: DC330B User Manual
Action
Action
5/00