Radio Shack PRO-433 Quick Start Manual page 9

Quick Start
4
. Select the target bank. The smallest empty channel number
fl ashes over the frequency.
5
. Press or
6
. Press E/PGM. If there is no empty channel, the scanner
automatically selects the fi rst channel of the bank.
T
o cancel the copy or move, press . /CLR /DELAY.
searching for frequencies
You can search for frequencies up or down using direct search.
1
. Press and hold SRCH. SRCH appears in the display.
2
. (Optional) To set a starting frequency, press HOLD and enter
the frequency.
3
. Press or
4
. (Optional) To avoid unwanted frequencies, you can skip up to
200 specifi ed frequencies during a search. To skip a frequency,
press L/O when the scanner fi nds the frequency.
•
You cannot skip frequencies during a weather service
search.
NOTES
•
If you skip all frequencies within the search range, the
scanner cannot search.
•
If you try to skip more than 200 frequencies, the
scanner will stop skipping the earliest skipped
frequencies.
To clear a skipped frequency, complete the following steps:
1
. Press HOLD/RESUME to stop the search.
2
. Select the frequency. L/O appears.
3
. Press L/O. L/O disappears.
4
. (Optional) To clear all the skipped frequencies, press HOLD/
RESUME, then hold down L/O until the scanner beeps twice.
to access the target channel.
to begin searching up or down the frequencies.
9