Data Skip - Radio Shack PRO-433 Quick Start Manual

Beyond the Basics
S-S.ALt ................................................................................... Alert settings
S-S.Lit ............................................................................. Back light settings
S-S.PS ....................................................................... Pager screen settings
S-S.OnlY ...............................................................................Mode settings
To turn off normal scanning, when Signal Stalker I is
running, turn S-S.OnlY setting to ON.
S-S.Int .................................................................... Voice interrupt settings
To keep Signal Stalker I active while receiving an audio
signal, set this function to ON. If you turn this function
OFF, the scanner does not check signals while receiving
an audio signal.
S-S.LOG ............................................................................Logging settings
Set S-S.LOG to ON to scan the log channels along with the
normal channels.
4
. For other settings, press
E/PGM.
5
. Press . /CLR /DELAY to exit the option mode.
6
. Press MENU to exit the menu mode.

data skip

Data skip prevents the scanner from stopping on nonmodulated or
data signals (such as fax or modem transmissions) during a search
or scan.
Data skip does not apply to the air band and weather
NOTE
search mode, as data signals are not generally found in
these services.
To turn on the data skip feature, complete the following steps:
1
. Turn off the priority feature if it is on.
2
. Press MENU.
3
. Repeatedly press
4
. Press
or
or to select OFF or ON, then press E/PGM.
or to select ON or OFF, then press
to display dAtA-S, then press E/PGM.
22