Using Your Cooktop's Special Features - Fisher & Paykel OR30SDPWIX Installation Instructions And User Manual

Freestanding

Hide thumbs

Table Of Contents

Table of Contents

Using the Auto Heat-reduce feature

This feature is available on all the cooking zones

Push and turn the control dial counter-clockwise to the 'A' setting until the

up on the corresponding cooking zone display then release the dial. Within 5 seconds turn the

dial to the desired power level (between 1 and 8); once a setting has been selected, after a few

seconds

will replace the power level on the display.

This feature allows the cooking zone to operate at the maximum power (100%) for a time

proportional to the selected power level; after this time the cooking zone will operate at the

selected level.

While this feature is operating it is possible, at any time, to increase the selected power level up

to level 8 (at level 9 the function will be disabled). It is not possible to decrease the power.

The Auto Heat-reduce feature can be disabled by turning the dial anti-clockwise to a lower

power level, turning the dial to the OFF position or by selecting level 9 or the PowerBoost

feature.

Note: If removing the pan from the cooking zone before the programme has been completed,

the Auto Heat-reduce feature will be completed with the remaining time if the pan is put back

on the cooking zone within 30 seconds, while the

30 seconds the zone is automatically turned off.

Using the PowerBoost feature

Turn the control dial clockwise to set the maximum power level (9), then turn clockwise again

to the

setting until 'P' appears on the display, then release the dial; the control dial returns

to the maximum setting (9) automatically and the

cooking zone display. The PowerBoost feature is now on.

This feature allows the cooking zone to operate at the PowerBoost maximum power (above the

rated power) for a maximum of 10 minutes; it could be used, for example, to rapidly heat up a

large amount of water. After 10 minutes

then decrease to power level 9.

The PowerBoost feature can be disabled by turning the dial anti-clockwise to a lower power

level, turning the dial to the OFF position or by turning the dial again to the

case the cooking zone operates at the power level 9.

Note: if a cooking zone is still hot, it is not possible to use the PowerBoost feature and

flash if you try to activate. The cooking zone is automatically set to the maximum power level (9).

The PowerBoost feature is always limited to a maximum of 10 minutes. You can activate the

PowerBoost feature again after 10 minutes.

Important!

The PowerBoost feature is not suitable for use with non water based cooking.

Do not use this function for heating oil (e.g. deep fat frying). The power density may be too high

and it could damage the cookware.