Nikon autofocus speedlight SB-900 User Manual page 97

Flash shooting in Advanced Wireless Lighting
1.
Setting the flash mode, flash output level compensation
values, and channel number on the master flash unit
Press the Function button 1 on the
master flash unit to highlight "
Press the [MODE] button, then
turn the selector dial to choose the
desired flash mode, and press the
[OK] button.
Press the Function button 2, then
turn the selector dial to choose
the desired flash output level
compensation value, and press the
[OK] button.
Press the Function button 1 to
highlight Group "
[OK] button.
• Turn the selector dial to choose a group
other than " ".
Repeat procedures
set the flash mode and flash output
level compensation values of the
remote flash units in Group "A".
In the same way with Group A, set
the flash mode and flash output level
compensation values of the remote
flash units in Groups "B"and "C".
Press the Function button 2, then
turn the selector dial to set a channel
number, and press the [OK] button.
".
", and press the
, above to
D–47
D