Repeating flash
In Repeating flash mode, the SB-900 fires repeatedly during a single exposure,
creating stroboscopic multiple-exposure effects. This operation is useful when
shooting fast-moving subjects.
•
Be sure to use fresh or fully charged batteries and allow enough time for the
flash to recycle between each repeating flash session.
•
Use of a tripod is recommended to prevent camera/flash shake, because slower
shutter speeds are used.
•
Underexposure is not indicated in Repeating flash mode.
Setting the Repeating flash
Display for Repeating flash
Number of
flashes
Flash shooting distance ( ▼ )
Press the [MODE] button.
Rotate selector dial to
indicate
.
Press the [OK] button to
confirm the setting.
Flash output level
Frequency
Flash shooting distance
(numerical indication)
D
D–17