t
Monitor pre-fl ashes
•
Monitor pre-flashes on or off can be set by using the custom setting. (kC-22)
•
When the monitor pre-flashes are activated, the SB-900 fires a series of
imperceptible monitor pre-flashes immediately before the flash fires to obtain
information on the subject.
•
To perform the Auto FP-High Speed Sync (kD-55) or FV Lock (kD-55),
activate the monitor pre-flashes.
Flash shooting distance range in Non-TTL auto flash mode
v
When using a telephoto lens in the Non-TTL auto fl ash mode
•
When shooting using a telephoto lens in Non-TTL auto flash mode,
underexposure may occur even though the subject is within flash
shooting distance range.
•
Use of the i-TTL mode is recommended.
The flash shooting distance range is indicated by
numbers and a bar chart on the LCD.
•
Set the shooting distance within this range.
•
The range varies depending on ISO sensitivity,
camera's image area setting, illumination pattern,
angle of coverage and aperture. For more
information, see "Specifications." (kF-16)
D
D–9