Emission Control System; Safety Rules - Ariens Zoom 42 Manual

4. DANGER!
To avoid dismemberment
hazard do not put hands
near moving belts.
Keep hands away from all
rotating or moving parts.
5. DANGER!
DANGER!
ALWAYS Keep hands and
feet away from discharge
chute.
Dismemberment Hazard -
NEVER put hands or feet
beneath guards and or
shields.
6. DANGER!
DO NOT touch parts which
are hot from operation.
ALWAYS allow parts to
cool.
7. CAUTION!
WARNING: Overfilling may cause
severe damage to evaporative
system!
• Never fill fuel tank when engine is
running, hot or unit is indoors. Never
overfill fuel tank.
• Replace fuel cap securely and clean
up spilled fuel.

EMISSION CONTROL SYSTEM

This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with emission
controls and components by unauthorized
personnel may result in severe fines or
penalties. Emission controls and components
can only be adjusted by an Ariens Company
dealer or an authorized engine
manufacturer's service center. Contact your
Ariens Company Equipment Retailer
concerning emission controls and component
questions.

SAFETY RULES

If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any
needed safety training before operation.
Only the user can prevent and is responsible
for accidents or injuries occurring to
themselves, other people or property.
Read, understand, and follow all safety
practices in Owner/Operator Manual before
assembling, using or working on this mower.
ALWAYS remove key from ignition and wire
from spark plug before assembly, or working
on this unit.
GB - 8
No smoking.
IMPORTANT: DO NOT
overfill.
Fill fuel tank to below
bottom of filler neck.