•
Only load paper for use as a cover.
•
You cannot make copies or prints on paper that is loaded in the document insertion unit.
•
You can load 12 5/8" × 17 11/16", 12" × 18", 11" × 17", LGL, LTR, LTRR, and EXEC.
•
A maximum of 100 sheets of paper (20 lb bond (80 g/m
3
Select the desired paper size → press [Next] .
1
Select the same paper size that is loaded in the document insertion unit.
To select an A or B series paper size, press [A/B-Size].
4
Select the desired paper type → press [OK] .
When printing on special types of paper, such as heavy paper, be sure to correctly set the paper type. If the type of paper is not set
correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or
the paper could jam.
For more information on available paper stock that can be loaded into the Document Insertion/Folding Unit-G1/Document Insertion
Unit-J1, see e-Manual > Basic Operations.
1-38
Document Insertion/Folding Unit-G1/Document Insertion Unit-J1 (Optional)
)) can be loaded in the tray of the document insertion unit.
2