Paper Deck Unit-A1/Pod Deck Lite-A1 (Optional); Loading Paper - Canon C9075 PRO Operating Manual

Paper Deck Unit-A1/POD Deck Lite-A1 (Optional)

If you attach the Paper Deck Unit-A1/POD Deck Lite-A1 to the machine, you have one additional source of paper for printing jobs.
The Paper Deck Unit-A1/POD Deck Lite-A1 holds up to 4,000 sheets of paper (17 lb bond (64 g/m
bond (80 g/m )).
2
If the machine is in the Sleep mode (the touch panel is not displayed, and only the main power indicator is lit), you may not be able to open the
paper deck. In this case, press the control panel power switch to reactivate the machine, and then press the open button.
•
The following paper sizes can be loaded in the Paper Deck Unit-A1 and POD Deck Lite-A1:
- Paper Deck Unit-A1: LTR
- POD Deck Lite-A1: 13" × 19", 12 5/8" × 17 11/16", 12" × 18", 11" × 17", LGL, LTR, and LTRR

Loading Paper

If you select the paper deck when it has no paper, or if the paper deck unit runs out of paper during a print job, a screen
prompting you to load paper appears on the touch panel display.
Follow the procedure below to load paper into the paper deck.
When loading paper, take care not to cut your hands on the edges of the paper .
•
Never place paper or any other items in the empty part of the paper deck next to the paper stack. Doing so may cause paper jams.
•
A paper blower is attached inside the paper deck. Do not insert paper clips or other foreign objects into the blower.
•
Paper jams may occur if you load paper into the Paper Deck Unit-A1/POD Deck Lite-A1 in a low humidity environment. If paper jams occur,
follow the instructions on the touch panel display to remove the jammed paper. In addition, make sure that the loaded paper is not curled.
Paper curls must be straightened out prior to loading.
•
A screen prompting you to load paper also appears if the paper deck is not fully inserted to the machine. Make sure that paper deck is properly
in place.
•
Do not load the following types of paper into the paper deck. Doing so may cause a paper jam.
- Severely curled or wrinkled paper
- Thin straw paper
- Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side of this paper either.)
•
Fan the stack of paper well before loading it, and align the edges of the paper stack on a flat surface.
•
The Paper Deck Unit-A1 can only accommodate paper from 14 lb bond (52 g/m
•
The POD Deck Lite-A1 can only accommodate paper from 14 lb bond (52 g/m
•
If a message prompting you to load paper appears during printing, the remaining prints are automatically made after you load the correct
paper. If you select another paper source, the remaining prints are made after you press [OK].
•
If you want to change the paper loaded in the paper deck from plain to coated paper, wait for the warm air fan to readjust its temperature
before you change the paper.
)) or 3,500 sheets of paper (20 lb
2
2 ) to 80 lb cover (220 g/m 2 )
2 ) to 110 lb cover (300 g/m²) in weight.
1
1-13
Paper Drawers